| |
SectionEditor培訓 |
| |
 班級人數--熱線:4008699035 手機:15921673576( 微信同號) |
| 增加互動環節，
保障培訓效果，堅持小班授課，每個班級的人數限3到5人，超過限定人數,安排到下一期進行學習。 |
| 授課地點及時間 |
上課地點：【上海】：同濟大學(滬西)/新城金郡商務樓(11號線白銀路站) 【深圳分部】：電影大廈(地鐵一號線大劇院站)/深圳大學成教院 【北京分部】：北京中山學院/福鑫大樓 【南京分部】：金港大廈(和燕路) 【武漢分部】：佳源大廈（高新二路） 【成都分部】：領館區1號（中和大道） 【廣州分部】：廣糧大廈 【西安分部】：協同大廈 【沈陽分部】：沈陽理工大學/六宅臻品 【鄭州分部】：鄭州大學/錦華大廈 【石家莊分部】：河北科技大學/瑞景大廈
開班時間(連續班/晚班/周末班）：2020年3月16日 |
| 課時 |
◆資深工程師授課
☆注重質量
☆邊講邊練
☆若學員成績達到合格及以上水平，將獲得免費推薦工作的機會
★查看實驗設備詳情，請點擊此處★ |
| 質量以及保障 |
☆
1、如有部分內容理解不透或消化不好，可免費在以后培訓班中重聽；
☆ 2、在課程結束之后,授課老師會留給學員手機和E-mail,免費提供半年的課程技術支持，以便保證培訓后的繼續消化；
☆3、合格的學員可享受免費推薦就業機會。
☆4、合格學員免費頒發相關工程師等資格證書，提升您的職業資質。 |
☆課程大綱☆ |
| |
- ZondProtocol 是地球物探分析軟件Zond的模塊之一，是一款實用的ERT.協議、質量控制、反演數據準備軟件(instruments MultiMax, COMx64, SGD-ETT, Omega, SysCal, ABEM,SCALA48/64)。
ZondProtocol represents ready solution for electrical tomography, and solves wide range of problems from protocol creating and field data processing to quality control and preparation data for inversion. The software provides support for the following instruments: SYSCAL, ABEM, COMMDD, ERA-MULTIMAX, TOMOZOND, OMEGA-48. Convenient interface and variety of data visualization features allow to solve wide range of geological problems with maximum effectiveness.
- Simplicity of using and compatibility with various types of instruments, allows to get high-quality results directly at work site. ZondProtocol allows to works the following survey types: land ERT 2D, land ERT 3D, crosshole ERT, water and underwater ERT. Depending on the skill of the operator, software provides various modes of operation.
-
- ZondProtocol allows you to create protocols of any complexity, combining any types of ERT electrodes array. Depending on the average resistivity of the rocks and the minimum response level, the system can chooses optimal parameters of electrodes array.
- The software uses simple and clear data file format that allows you to combine different types of ERT survey. Well-known data formats are supported.ZondProtocol includes a variety of procedures for visualization and processing of induced polarization obtained in the time or frequency domain.
- The software can be used for following tasks: protocol’s creating (automatic and interactive), process control measurements, loading data to/from instruments, visualization and analysis of measurement, quality control, data converting, import and export, preparation data for inversion.
|
|
|
|
|
|
首頁 課程表 在線聊 報名 講師 品牌 QQ聊 活動 就業